$439.00 $419.00

Take total control of your engine cooling with the Davies Craig EWP®115 Alloy Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan.

The EWP®115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy. Our EWP range are also extensively used in Intercooler Applications.

EWP115 Alloy ELECTRIC WATER PUMP      LCD Controller
Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
Maximum current 10A @ 13V Display LCD size

64.6mm (2.54”) x 55.6mm (2.19”)

Flow rate (max) 115 L/min (30.38 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40° to 130°C (-40° to 266°F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
40°C (104°F)to 110°C (230°F)
Pump weight 920 grams (2.3 lb) Memory Set & targeted temperature
Pump material Aluminium (Powder Coated) Fan cut-in temp. 3°C (5.4°F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type
Thermister in housing

Self Priming

No, none of our pumps are self-priming

Fits hose sizes


Internal Fitting 

35mm to 51mm (1.38” to 2”)


-Inlet & Outlet: -16AN ORB

Overrun/ shutdown -10°C (14°F) below set/target temperature or 3 minutes
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Push-On fitting Size 

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  •   with 6mm Sleeve (#8511) 51mm  
Weight 100 grams (3.5 oz)

Length = 98mm (3.8")
Width = 95mm (3.7")
Depth = 25mm (1”)