DAVIES CRAIG EWP150 12V 150LPM/40GPM Remote Electric Water Pump & Controller (Part #8970)

$289.00 $276.00

Muscle up your engine cooling system with the Davies Craig EWP® 150 alloy Electric Water Pump and the LCD EWP®/Fan Digital Controller.

Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat & intercooler applications.

SUITABLE FOR Standard Engines 5.0L or greater or Modified Engines Supercharged/Turbo, Drag Racing, 4WD, Off Road, Drifting & Speedway


Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
 Maximum current 10A @ 13V Display LCD size 64.6mm (2.54”) x 55.6mm (2.19”)
Flow rate (max) 150L/min (39.63 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40° to 130°C (-40° to 266°F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
40°C (104°F)to 110°C (230°F)
Pump weight 1,170 grams (2.6 lb) Memory Set & targeted temperature
Pump material Aluminium (Powder Coated) Fan cut-in temp. 3°C (5.4°F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type
Thermister in housing

Self Priming

No, none of our pumps are self-priming

Fits hose size

35mm to 51mm (1.38” to 2”)

Overrun/ shutdown -10°C (14°F) below set/target temperature or 3 minutes
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Internal Fitting -Inlet & Outlet: -16AN ORB Weight 100 grams (3.5 oz)
Push-On fitting Size

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm

Length = 98mm (3.8")
Width = 95mm (3.7")
Depth = 25mm (1”)